Commercial Teak Outdoor Dining Sets for Global B2B Procurement

Grade A Indonesian teak (*Tectona grandis*) sourced from mature Perhutani plantations contains the industry's highest natural density of teak oil and natural silica. This wood is harvested exclusively from the center heartwood core of trees aged 30 to 50 years. Unlike oak, pine, eucalyptus, or white-wood alternatives, Grade A teak does not rot, swell, warp, or splinter when exposed to torrential rains, freezing moisture, or intense equatorial sun. Its high natural oil concentration acts as a permanent barrier against moisture absorption, rendering chemical pressure treatments unnecessary and delivering an outdoor operational lifespan of 25+ years in high-traffic commercial environments.

As a direct manufacturer, our standard order size is one 20-foot or 40-foot High Cube (40ft HQ) container. A 40ft HQ container typically accommodates between 90 and 140 complete teak outdoor dining sets (table + 6 chairs), depending on whether the dining chairs are stackable or knock-down (KD) and table dimensions. We allow buyers to consolidate multiple models—such as extending dining tables, stackable chairs, garden benches, and sun loungers—within a single container order to optimize inventory diversity.

Timber movement occurs when wood is shipped between differing relative humidity zones. We prevent end-grain checking, warp, and joint failure through three engineered safeguards: 1) **Strict Kiln Drying:** All teak timber is dried in our controlled kilns to a targeted moisture content of 8% to 12% MC before assembly; 2) **Expansion Slats & Floating Tops:** Table tops are constructed with precise 4mm–6mm expansion gaps between slatted planks and mounted using slotted tabletop fasteners, allowing natural seasonal expansion and contraction without splitting structural aprons; 3) **Traditional Joinery:** All main frame connections use interlocking mortise-and-tenon joints locked with solid teak wood dowels rather than relying solely on metal screws or surface adhesive.

For high-performance outdoor durability, all metal fasteners, butterfly leaf extension hinges, sliders, and assembly bolts are manufactured from 304 or marine-grade 316 stainless steel, as well as solid brass. We explicitly avoid zinc-plated or galvanized iron hardware, which inevitably corrodes, bleeds rust stains into the teak grain, and causes joint failure in humid or oceanfront environments.

Yes. CV. Prima Putra is fully certified under Indonesia’s national SVLK (Sistem Verifikasi Kelestarian Hutan) timber legality verification system. Every export container of teak outdoor dining sets is cleared through the Indonesian Ministry of Environment and Forestry and issued an official V-Legal Document / FLEGT License. This paperwork provides verified chain-of-custody tracking from government-managed sustainable plantations, guaranteeing full compliance with EUTR, EUDR, UKTR, and US Lacey Act import regulations.

Absolutely. Over 60% of our production volume consists of custom contract manufacturing for furniture brands, resort chains, and private-label catalogs. You can submit CAD drawings, 3D render models, technical spec sheets, or physical reference samples. Our engineering team reviews dimensions, recommends optimal joinery structures, prepares technical production shop drawings, and produces a physical prototype for written approval before full container production begins.

We offer four standard export finish options: 1) **Fine Sanded Natural:** Raw Grade A teak sanded to a 240-grit silky smooth surface, designed to naturally weather over time into a silver-grey patina; 2) **Teak Oil Finish:** Penetrating natural teak oil coat that enhances warm golden honey hues while adding temporary surface dirt resistance; 3) **Outdoor Water-Based Sealer / Shield:** Clear or tinted polyurethane eco-sealer that locks in natural timber coloration and prevents graying; 4) **Weathered / Vintage Antique Finish:** Wire-brushed surface treatment with distressed gray/brown undertones for immediate rustic aesthetic appeal.

Our standard factory production lead time is 45 to 60 days following deposit confirmation and final sample sign-off. Peak production seasons (September through January) may require 60 to 75 days depending on timber kiln-drying cycles and current workshop scheduling. Repeat orders for catalog models with archived specs can often be expedited.