Precision-machined from plantation-grown Indonesian teak and high-spec outdoor composites. Factory-direct wholesale models manufactured under EN 581 standards for global project engineering.
Established in 2011 in Jepara, Central Java—the historical epicenter of Indonesian wood engineering—Prima Furniture (CV. Prima Putra) operates as a fully integrated manufacturer and exporter. We bridge traditional solid wood craftsmanship with computerized precision manufacturing to produce high-specification dining tables, commercial seating, and architectural contract furniture for international procurement networks.
Unlike trading intermediaries, every piece in our 40-foot container shipments originates inside our own facility. We manage the entire production chain: raw timber selection from certified government plantations (Perhutani), computer-controlled kiln drying to strict moisture tolerances (8%–12%), heavy-duty mortise and tenon joinery machining, structural load verification, and zero-VOC surface finishing.
Our operational architecture is engineered specifically for institutional buyers, luxury hotel developers, retail chains, and private-label furniture brands across North America, Europe, Australia, and the Middle East.
Exporting solid timber products into regulated markets demands transparent chain-of-custody verification. Prima Furniture operates under strict SVLK (Sistem Verifikasi Kelestarian Hutan) compliance—Indonesia’s mandatory timber legality assurance system aligned with EU Timber Regulations (EUTR) and UKTR standards.
Navigating European Safety Standards (EN 581-1, EN 581-3) & Structural Testing Protocols for Hospitality Procurement.
Commercial dining tables destined for public spaces undergo intense mechanical stress. Under EN 581-3 standards, our table frames endure vertical static load tests up to 200 kg and horizontal fatigue force testing over 10,000 cycles without joint deformation or structural fastener failure.
Outdoor dining tables face drastic humidity shifts, UV radiation, and thermal expansion. We engineer expansion gaps, marine-grade 316 stainless steel hardware, and specialized polyurethane sealing coats that pass EN 581 climate exposure tests without surface checking or delamination.
All surface glues, oils, and lacquer systems applied to Prima Furniture dining collections comply with European REACH regulations. Finishing oils are non-toxic, lead-free, and safe for direct food contact surface proximity in dining environments.
Understanding timber grain density, heartwood percentages, and performance attributes is vital for optimizing project budgets while maintaining CE structural compliance.
| Technical Parameter | Grade A Teak (Perhutani Premium) | Grade B Teak (Heartwood / Sapwood Mix) | Grade C / Plantation Young Wood |
|---|---|---|---|
| Heartwood Ratio | 100% Mature Heartwood | 60% – 70% Heartwood | < 40% (High Sapwood) |
| Natural Oil Content | High (Self-preserving, weather resistant) | Moderate (Requires periodic oiling) | Low (Requires chemical treatment) |
| Moisture Content Target | 8% – 12% (Controlled Kiln Drying) | 12% – 15% | Often Air-dried (>18%) |
| EN 581 Commercial Suitability | Heavy Commercial / Luxury Resort | Light Commercial / Residential | Not Recommended for Contract Use |
| Joinery Machining Tolerance | ± 0.2mm CNC Mortise & Tenon | ± 0.5mm Standard Router | Manual Doweling |
| Expected Lifespan (Outdoor) | 25+ Years Maintenance-Free | 10–15 Years with Care | 2–5 Years |
How international interior designers, hotel chains, and retail buyers are restructuring their solid furniture supply chains for carbon transparency and structural durability.
With ocean freight volatility remaining a critical procurement factor, commercial buyers are shifting away from fully welded or rigid single-piece dining tables. Future-proof dining table designs feature precision-machined Knock-Down (KD) leg systems equipped with internal steel sleeve inserts.
This structural approach increases container loading density by up to 350% per 40HQ container while maintaining structural rigidity that passes rigorous commercial shear-force testing upon site assembly.
Architectural dining projects increasingly specify hybrid material matrixes. Combining solid teak table bases with powder-coated aluminum understructures or UV-resistant sintered stone tops provides maximum aesthetic warmth alongside zero-maintenance utility.
Prima Furniture's R&D department integrates localized metal fabrication and precision woodjoinery to meet modern hybrid furniture specifications under one roof.
Global architectural firms now mandate full transparency regarding embodied carbon in contract furniture. Sourcing solid wood furniture from SVLK-certified factories guarantees that timber is harvested from sustainably managed forests where replanting cycles offset carbon output.
Our digital chain-of-custody tracking allows project managers to verify log origins from plantation lot numbers down to the final finished dining set.
Hospitality operators are moving away from short-lifecycle composite or laminate tables that end up in landfills after 3 years. Solid Grade-A teak dining tables offer infinite sand-and-refinish cycles, reducing overall long-term capital expenditure for major hotel brands by over 60% across a 15-year operational window.
Eliminating dimensional drift, moisture cracking, and finishing defects before goods leave our Jepara factory floor.
Sourcing SVLK plantation teak. Planks are stacked with spacers and dried in automated steam kilns for 21–30 days until core moisture reaches 8–12%.
Computerized double-end tenoners cut mortise and tenon joints to tight tolerances. Table tops are edge-glued using waterproof D4 polyurethane adhesive.
Every table model is fully assembled prior to finishing. Structural integrity, leg level alignment, and extension mechanisms are load-tested and inspected.
Multi-stage sanding up to 400-grit. Application of natural teak oils or water-based polyurethane. Packed in 5-ply heavy corrugated cartons with edge protectors.
Everything you need to know about custom specifications, MOQ, CE compliance, and international container logistics.
We provide full SVLK V-Legal certificates for every shipment, which serve as proof of legality for EUTR, UKTR, and US Lacey Act compliance. For CE certification, we supply structural test reports matching EN 581 standards along with chemical safety compliance data for surface coatings upon request.
Yes. Over 60% of our production consists of custom contract furniture. We accept CAD files, 3D renderings, structural drawings, or physical reference samples. Our engineering team reviews your drawings, creates shop drawings for approval, and builds a prototype piece before full container production begins.
Our standard minimum order volume is one 20-foot container, which can be mixed across up to 4 different product designs. For standard 40-foot HQ containers, lead times typically range from 45 to 60 days depending on wood species and finishing complexity. Repeat collection runs carry shorter turnaround times.
Wood stability is governed by moisture content control. We kiln-dry indoor timber to 8%–10% and outdoor teak to 10%–12%. Additionally, we machine relief grooves on the underside of wide dining table tops and utilize floating panel construction techniques to allow natural wood expansion without structural warping.
We offer raw fine-sanded natural teak (which gracefully ages into a silver-grey patina), water-based eco-friendly teak oils, protective polyurethane sealers, antiqued weathered finishes, and wire-brushed textures. All coatings are formulated for intense weather exposure and UV resistance.
Dining table tops are wrapped in protective foam sheets, fitted with high-density corner guards, and encased in 5-ply double-wall corrugated cartons. For high-value custom tops or glass/stone hybrid tables, we build IPPC-certified ISPM-15 heat-treated wooden crates for outer container stabilization.
Contact our engineering desk today to submit your technical drawings, request a factory quotation, or schedule a virtual factory tour of our Jepara manufacturing facilities.
